So, if you add another drive with bootable partitions, you may need to swap SATA cables to get the kickstart to load from the right place. If your highest priority bootable drive is not connected to Port1, SATA2 then a kickstart from another drive will be loaded. After Kickstart is loaded, ALL drives will be scanned again and Workbench from the highest priority bootable drive will load. Kickstart from the partition with the highest priority is then loaded. Specifically, the SATA CD-ROM and SATA drive connected to Port1, SATA2 and IDE devices are scanned for partitions which are set as AmigaOS bootable, using the FFS2 or SFS file systems and containing an AmigaOS system. Please remember to refer to CFE's documentation located in SYS:Documentation/X1000_CFE.pdf for information on boot configuration.Īs soon as the "amigaboot.of" loader begins, it scans all the available AmigaOS partitions it can find. Troubleshooting Tips X1000 CFE Documentation Xena Co-processor running at 500 Mhz with a XCore XS1-L2 124 SDSĪ-Eon Technology is the manufacturer of the AmigaOne X1000 motherboard.ĪmigaKit is the worldwide distributor of the AmigaOne X1000 System.Dual core PWRficient PA6T-1682M 1.8 Ghz PowerISA v2.04+ CPU.3.13 Intermittent power on/off problems.3.12 Creating a new boot CD step by step.3.11 X1000 Keyboard does not work while booting.3.10 X1000 boots to black screen with RadeonHD 2.7 driver.3.9 X1000 won't boot (black screen, no boot at all) with only 3 LEDs lighting on motherboard.
3.8 X1000 fails to boot, "Failed to load amigaboot.of: Insufficient memory".3.6 X1000 fails to boot, "Loading" indicator goes full red and then stops.3.4 X1000 locks up randomly and doesn't boot reliably.
0 kommentar(er)
